home *** CD-ROM | disk | FTP | other *** search
- On 20 Mar 1996, Douglas Little wrote:
-
- > You could even try a 64/32Mhz combo if you use enough heatsinks.
-
- How much heatsinks you use on 50/25? I have installed an aditional fan
- cooler but it is still unstable :-(
-
- > PowerUp2 was unstable at 32Mhz on our prototype Falcon - yet it's quite happy
- > at 48Mhz with the BSS card. It's a 'suck it and see' scenario. It has a lot to
- > do with interference from other circuits & the quality of the logic gates.
-
- I would be very interested in "repairing" my FX card from interference etc.
-
- > > Well, I have been always told that the Blitter (which is part of Combel
- > > so can't be removed) is not able to run at more than 20 MHz, so there's
- > > no way to speed up the bus at more than 20 MHz.
- > > According to some infos there's probably a way, but I can't imagine it.
- >
- > The problem is quite solvable - see one of my other replies...
-
- OK, but what about SCSI DMA ?
-
- Petr
- --
- +--------------------------------------------------------------------------+
- | stehlik@leo1.zlin.vutbr.cz -- 2:421/36@fidonet.org -- 90:1200/2@nest.ftn |
- | Falcon030/FPU/FX/36MHz/4ST+8FX RAM/IDE 1080 MB running TOS or Linux-m68k |
- | MegaSTE/16MHz/4MB RAM/240MB/Riebl card/USR DS 16k8 running Joy BBS 24hrs |
- +--------------------------------------------------------------------------+
-
-